Robertson's Water Based ENAMEL SATIN
This is an advanced low VOC, non-yellowing, self levelling acrylic enamel. Ideal for trim work such as doors, window frames and skirting boards or where a scrubbable satin finish is required
Coverage Up to 15 square metres per litre depending on surface conditions.
Gloss Level The finish coat has a gloss level of between 25% and 35% when viewed at a 60 degree viewing angle
Drying Time In average weather conditions (25C) it will be touch dry in 30 minutes and can be re-coated in 2 hours. Allow longer drying time in cold or humid weather. Tinted paint will darken as it dries. Full curing of the paint film takes approximately 4 weeks.
Available sizes 1, 2, 4 and 10 litres
*VOC level of less than 45g per litre
Robertson's Water Based ENAMEL GLOSS
This is an advanced low VOC, non-yellowing, self levelling acrylic enamel. Ideal for trim work such as doors, window frames and skirting boards or where a scrubbable gloss finish is required
Coverage Up to 15 square metres per litre depending on surface conditions.
Gloss Level The finish coat has a gloss level of between 80% and 85% when viewed at a 60 degree viewing angle
Drying Time In average weather conditions (25C) it will be touch dry in 30 minutes and can be re-coated in 2 hours. Allow longer drying time in cold or humid weather. Tinted paint will darken as it dries. Full curing of the paint film takes approximately 4 weeks.
Available sizes 1, 2, 4 and 10 litres
*VOC level of less than 45g per litre